CALGARY – More than 20 groups are calling for a public inquiry into the safety of oilsands extraction techniques that use steam.
The organizations made their demand to the Alberta Energy Regulator on Tuesday as bitumen continues to ooze out of the ground at a project owned by Canadian Natural Resources Ltd. (TSX:CNQ).
The groups say CNRL’s Primrose East project, 250 kilometres northeast of Edmonton, isn’t the first example of a unexplained failure of an oilsands operation like Primrose.
“It is time for a broader discussion of the safety and regulation of steam injection given these recurring events,” said Greenpeace campaigner Mike Hudema said in a news release.
“The AER needs to reassure the Alberta public and other stakeholders that it has the regulations in place to prevent similar incidents from occurring in the future.”
About half of current oilsands production comes from in-situ methods that pump steam deep underground to soften the tarry bitumen and enable it to flow through to the surface. The rest comes from open-pit mining of the oilsands.
Get weekly money news
The depth of the oilsands deposit is one of the factors that determines which method is used, but the trend has been towards more in-situ extraction methods.
The in-situ method will eventually account for about 80 per cent of the oilsands extractions, said Carolyn Campbell, of the Alberta Wilderness Association.
“Therefore, it’s important that we get this right,” Campbell said in the groups’ statement.
To extract bitumen at Primrose, Canadian Natural uses a method called high pressure cyclic steam stimulation, sometimes described as “huff and puff.” It involves injecting steam into a reservoir through a well, letting it soak for awhile and then drawing the softened bitumen to the surface through the same well.
The extraction method, which companies have used for decades, involves fracturing the rock to let the steam through, but not so much that it allows bitumen to flow to the surface.
A more common technique is steam-assisted gravity drainage, or SAGD, which pumps steam into one well and uses another well below it to bring the bitumen to the surface.
Though cyclic steam stimulation has grabbed the most headlines recently, the environmental coalition wants the Alberta Energy Regulator to examine both techniques.
CNRL says faulty old wellbores are to blame for the Primrose East leak, though the AER says it still doesn’t know the cause.
An investigation by Alberta’s energy watchdog into a similar 2009 leak at Primrose said a potential cause could have been “geologic weaknesses in combination stresses induced by high-pressure steam injection.”
But Canadian Natural has said it’s unlikely that damaged caprock was behind that spill and the more recent one, which was first detected in late June, about the time that heavy rains caused severe flooding further south.
The damage at Primrose East has been contained to a 13.5-hectare area and the company has been cleaning up an estimated 20 barrels — nearly 3,200 litres — that continues to seep out every day at ever-declining rates.
Comments